Benvenuto, Visitatore. Per favore, effettua il login o registrati.

  Hai perso la tua email di attivazione?

Main Home Help Ricerca Login Registrati

+  Virtual Sound - FORUM
|-+  Computer (& Computerless) Music
| |-+  Hardware e dintorni
| | |-+  Teleo
« precedente successivo »
Pagine: 1 2 3 [4] 5 Stampa
Autore Topic: Teleo  (Letto 10382 volte)
brunozamborlin
Hero Member
*****
Posts: 787



Guarda Profilo
« Risposta #45 il: Febbraio 03, 2006, 13:56:49 »

Sono molto contento di questo Occhiolino Hai ragione, a lavorare in due ci si mette meno di metà tempo, mi fa davvero piacere.

Io sono programmatore, se c'è bisogno di fare cosette in C o Java (dentro o fuori Max) posso dare una mano. Poi conosco quasi tutti quelli di Tempo Reale ( link ) perchè ci lavoravo, di sicuro qualche consulenza telefonica possono offrirla anche loro in caso di problemi.

Ti tengo aggiornato su ulteriori sviluppi.
Loggato

NOwave
Full Member
***
Posts: 233



Guarda Profilo
« Risposta #46 il: Febbraio 03, 2006, 16:57:50 »

 Sorriso
Loggato
brunozamborlin
Hero Member
*****
Posts: 787



Guarda Profilo
« Risposta #47 il: Febbraio 03, 2006, 17:17:52 »

Allora:

1 -  per la latenza della UE9 (quella ethernet) c'è una tabella sul manuale (link) a pag.37.

2 - Alla domanda: in che modo si comunica via ethernet cn UE9? ecco la risposta:

One option with the UE9 is to do direct low-level Ethernet commands
using TCP or UDP.  The UE9 does have its own IP address.  See Section
5 of the User's Guide.  Also see the various low-level examples
towards the bottom of the UE9 downloads page.


Quindi con netsend/netreceive ci si può fare in Max la propria patch "UE9" senza problemi.

3 - Per espandere I/O?

Most people expand just by using multiple units, but it certainly is
possible to use add-on accessories.  The only module we currently have
planned is an analog input expansion board (64 channels), but we might
look at digital I/O expansion also in the future.


4 - voi non vendete sensori. è possibile utilizzare sensori comprati da makingthinks (teleo) o dai produttori di altre interfacce?

I could not find much electrical detail at the web sites you sent, but they both seem to use sensors with 0-5 volt outputs, which is a fine voltage range for the UE9.

A me pare ottima, dimmi le tue impressioni, pro e contro Sorriso
Loggato

NOwave
Full Member
***
Posts: 233



Guarda Profilo
« Risposta #48 il: Febbraio 03, 2006, 17:43:27 »

Per me è OK e anche la parte software di Labjack mi sembra fatta bene , inoltre posso trasformarla anche in wireless quindi , secondo me la scelta è azzeccata.
Per i sensori è ok se ne trova un vasto assortimento , per esempio quelli del Teabox vanno bene anche qui.vedi anche
http://www.labjack.com/forums/index.php?showforum=4

L'unico appunto riguarda netsend/netreceive che non ho mai usato, ma se sono standard object non
dovrebbero dare problemi (spero).Tu li hai già usati ?

Ora sento il mio tecnico che ne pensa e ti faccio sapere.

Ciao p
« Ultima modifica: Febbraio 03, 2006, 18:56:01 da NOwave » Loggato
brunozamborlin
Hero Member
*****
Posts: 787



Guarda Profilo
« Risposta #49 il: Febbraio 03, 2006, 19:08:12 »

Si per i sensori è ok, wireless pure mi pare.
Netsend e Netreceive gli ho usato molto spesso (anche nella loro versione audio), e anche via internet (in teoria infatti, il tuo guanto a casa tua potrebbe suonare il mio nord lead a casa mia Sorriso ).

Sono curioso di sapere il parere del tuo amico. Speriamo bene.
Loggato

brunozamborlin
Hero Member
*****
Posts: 787



Guarda Profilo
« Risposta #50 il: Febbraio 03, 2006, 19:10:42 »

ps: forse possiamo ordinarli da http://ljcontroller.bzhtec.com/ , per email mi hanno detto che ne hanno in casa (ne comprano a blocchi di dieci per usufruire degli sconti) ma non ho capito se parlasse dei U12 o dei UE9.
Loggato

NOwave
Full Member
***
Posts: 233



Guarda Profilo
« Risposta #51 il: Febbraio 03, 2006, 23:36:56 »

Sono curioso di sapere il parere del tuo amico. Speriamo bene.
Al momento è impegnato su un altro progetto e non può vedere le mail che gli ho mandato perchè è via in questi giorni.

Cmq , io mi sono letto la User Guide dell' UE9 ed in effetti sembra una macchina decisamente
più sofisticata rispetto ai vari Teleo,Miditron,etc però ci sono alcuni punti da chiarire secondo me:
1_A me sembra che basterebbe un U3 per fare il lavoro .
2_Usando U3 il problema sarebbe "come entro in Max?" bisognerebbe scrivere un external
    per Max basato sul driver della Labjack , come hanno fatto  http://ljcontroller.bzhtec.com
   o forse lo stesso oggetto ljcontroller potrebbe funzionare. (stesso driver Labjack )
3_Le specifiche del UE9 sono interessanti , ma ho dei dubbi perchè questa macchina in realtà,
    costa parecchio , nasce per altri scopi , e per questa ragione ho paura di sorprese.
   ( sul sito Cycling hai avuto feedback su U3,U12 e UE9 ? ).
4_Quale motivo ti induce a preferire UE9 a U3 ?

Ciao p
« Ultima modifica: Febbraio 03, 2006, 23:38:27 da NOwave » Loggato
NOwave
Full Member
***
Posts: 233



Guarda Profilo
« Risposta #52 il: Febbraio 04, 2006, 08:28:40 »

Risposta da Electrotap _ Teabox
Citazione
I want to build a Glove and using sensors an Teabox .
My project is:
1_Teabox
1_Dual-Axis Accelerometer and Tilt Sensor
1_Gyroscope
3_Bend/Flex Sensor
My biggest concern is how you want to connect the Glove sensors to the teabox. You have 6 sensor outputs listed above. You could bundle those together on 2 6 conductor RJ-11 telephone cables which would run right into the teabox. That would be the easiest way to do it. If you wanted it on one cable you would then need to split it back up at the Teabox before running it into the inputs.
If you are looking for a pcboard to solder to, if you give me an idea of what you need, I can look through our stacks to see if there is something that would work. In general they would be $5 or less.
I'm actually making something similar for an extended harmonica interface. I'm making some changes to one of our pcboards so that I can have 2 RJ-11 jacks that are easy to solder to, which will be mounted on my wrist and split out to the other sensors. That way there's one point where all the sensors congregate before being sent to the Teabox. How were you thinking of connecting the sensor glove to the teabox?
_Have you done it before?
_Any suggestion?
The trick may be attaching the sensors to a glove that isn't too cumbersome. I've been toying with the idea of ditching the glove and attaching stuff to a wristband and elastic bands around my fingers. I guess we won't know until we try.
_Can i customize from others Analog Devices Sensors ?
Sure. As long as the output is analog, between 0 and 5 volts, you can use any sensor. (0.25 -4.75v is best - this is Analog Devices' standard) You can make your own sensors or buy others. One thing to look out for is that the Teabox will only support 250mA of power. Most sensors use so little that this doesn't matter, but some, like sharp IR sensors use 50mA a piece and can add up quickly. If this becomes a problem, we have a power injector that can add more power to the sensors, but I doubt you'll reach that point.
_The Dual-Axis Accelerometer and Tilt Sensor has got just two
outputs , where do i get the tilt value ?
The accelerometer is the same thing as a tilt sensor. If you tilt the sensor, it detects the forces of gravity and sends out a voltage range of around 2.0 to 3.0. Faster movements will cause it to swing to the outer voltages. This can cause problematic data if you bump the sensor because it will sense the deflection, not just the tilt. You can put a low pass filter on the data to keep any spurious movements out, but it makes it less responsive. As far as I know, there are no tilt sensors that overcome this problem. If you find one let me know, I'd be interested to look at it.
Our Tilt version of the Accelerometer scales the signal so that it the tilt saturates the entire sensor input range.
If you have any other questions or need clarification, please let me know

Guarda un pò qui
http://ccrma.stanford.edu/~kuangzn/250A/glove.html
http://www.procyonengineering.com/avr/avrmini/

Converte in OSC , mi sembra interessante , che ne dici ?
« Ultima modifica: Febbraio 04, 2006, 09:20:14 da NOwave » Loggato
brunozamborlin
Hero Member
*****
Posts: 787



Guarda Profilo
« Risposta #53 il: Febbraio 04, 2006, 11:50:54 »

Interessante si. Ma non parlano di Max.

L'U3 e l'U12 non li ho scartati, ma sarebbe più complesso comunicare con loro da Max perchè non adottano il protocollo TCP...
Loggato

NOwave
Full Member
***
Posts: 233



Guarda Profilo
« Risposta #54 il: Febbraio 04, 2006, 12:28:45 »

Mi sa che dobbiamo semplicemente partire con qualcosa e poi si vedrà , sennò ci incagliamo a
mappare tutto il Web.

Se pensi che UE9 dia sufficenti garanzie io ci sto e partiamo quando vuoi.

Ciao p
Loggato
brunozamborlin
Hero Member
*****
Posts: 787



Guarda Profilo
« Risposta #55 il: Febbraio 04, 2006, 15:22:48 »

Così si parla Sorriso

Un breve pensiero sul forum della cycling riguardante la differenza tra teleo e u12:

also, some idea about teleo vs U12 - the U12 has more inputs and outputs,
and the analog inputs are better on the U12. The Teleo appears to be
targeted towards motor control and robotics, as it has 2 high power PWM
outputs that the U12 does not have.
so u might try to investigate deeper according to ur needs.
ido


Ok, io dico che abbiamo più bisogno di un UE9 allora Sorriso

Nowave, io da lunedì a mercoledi sono via e non guarderò internet, dici che ordiniamo domani, ordini tu lunedì e ne prendi una anche per me (nn ho se facciano contrassegno o pagamento anticipato, poi guardo nel sito e nel caso ti invio i soldi) oppure aspettiamo giovedi?

Dimmi tu, per me è indifferente. (magari sentiamoci privatamente che esula un po dall'interesse comune.. Sorriso )
Loggato

NOwave
Full Member
***
Posts: 233



Guarda Profilo
« Risposta #56 il: Febbraio 04, 2006, 16:00:34 »

Meglio si , ti ho mandato una mail
Loggato
mauriziogiri
Amministratore
Sr. Member
*****
Posts: 349


Guarda Profilo WWW
« Risposta #57 il: Febbraio 04, 2006, 17:27:48 »

(magari sentiamoci privatamente che esula un po dall'interesse comune.. Sorriso )

Ok, però poi tornate qui a scambiarvi le vostre impressioni d'uso, perché è interessante. Sorriso (e così resterà a futura memoria)

m
Loggato

Maurizio Giri Home Page: http://www.giri.it
NOwave
Full Member
***
Posts: 233



Guarda Profilo
« Risposta #58 il: Febbraio 04, 2006, 19:29:42 »

SICURO. Pausa di riflessione poi si parte !! Scioccato
Loggato
brunozamborlin
Hero Member
*****
Posts: 787



Guarda Profilo
« Risposta #59 il: Febbraio 11, 2006, 11:09:52 »

Giro dell'oca: alla fine ci prendiamo tutti e due il Teleo.

Ora stiamo scegliendo i sensori da abbinarci Occhiolino
Loggato

Pagine: 1 2 3 [4] 5 Stampa 
« precedente successivo »
Salta a:  


Login con username, password e lunghezza della sessione

Powered by MySQL Powered by PHP © Copyright 1996 - 2008 - ConTempoNet Edizioni Musicali ® - P.IVA: 05174251008
Tutti i diritti riservati - Tutti i marchi sono registrati -
È vietata la riproduzione, anche parziale, dei testi e delle immagini.
Powered by SMF 1.1.5 | SMF © 2006-2008, Simple Machines LLC
Traduzione Italiana a cura di SMItalia
XHTML 1.0 Valido! CSS Valido!